Four Myths About Ductless Mini-Splits

Mini split in room near ceiling

Understanding the Pros & Cons of Ductless Mini-Split AC Systems

Over the past few years we have all observed the U.S. HVAC industry’s fascination with ductless “mini-split” air conditioning systems in the U.S. Recent HVAC trade shows have been crowded with OEM’s promoting this “new” way of providing home comfort. National advertising and media/public relations tactics would make us think it is just a matter of time before we all say goodbye to our central AC systems and get with the rest of the world (i.e. Japan, China and Europe) in the way we keep our homes and businesses cool and comfortable.

The article below was written in 2013. We have updated information for homeowners busting myths about ductless mini split systems, outlining what to consider when choosing a new HVAC system, as well as recommendations on when a ductless system might be right for your space.

The AC & Heating Connect staff has also conducted research on ductless systems and uncovered some facts that might be of interest to contractors and distributors as the industry plans for the future growth of this segment.

Myth #1 – The sales of ductless mini-spit systems continue to grow and will dominate the U.S. market in a few years.

Industry statistics would not support this statement. While the ductless segment has posted impressive growth rates in the U.S. since 2005, the growth rates have been slowing recently and the largest ductless segment (small, single evaporator systems) have not grown at all since 2010. These sales remain stable at about 260,000 units per year, or only about 4% of total unitary AC shipments. Some larger VRF-style commercial systems continue to grow at higher rates, but their numbers in the U.S. remain small at only 28,000 units per year.

Myth #2 – Ductless mini-splits are ideal whole-home HVAC solutions in the U.S.

The current economic facts about ductless simply do not support this claim. The installed costs associated with using mini-splits to cool and heat an average 2,000 square foot home with ductless mini-splits would cost almost three times the cost of simply replacing your central AC system with another ducted system. Even in a home where you had to provide new ductwork for the central system, you could still expect to spend about 50% less on a typical central AC system installation versus the more expensive ductless options.

Myth #3 – Ductless mini-splits are more energy efficient because there are no air leaks in the ductwork.

What people who make this claim fail to mention is that in ducted homes, which have poorly installed and leaking air ducts, the conditioned air is probably leaking out of the ductwork but it is going into the conditioned space somewhere and helping to keep the house cool. In those cases the cooling energy is really not lost to the homeowner. While mini-splits don’t have duct losses, they do have other losses. Instead of distributing conditioned air throughout the home, mini-splits distribute refrigerant. In many cases these refrigerant lines are run outside the conditioned space and in these cases there are thermal losses associated with energy transferring from those lines to the space outside the home. A legitimate energy loss occurs when you are heating or cooling your backyard with mini-split refrigerant lines (see photo below). Duct leaks that leak into the conditioned space are not really losses at all unless they escape to an unconditioned space. The other claim made by mini-split advocates is that they provide energy saving due to “zoning” or shutting off energy use in unoccupied rooms. What they fail to mention is there are other modern methods to zone off rooms besides using ductless methods. There are many ways to achieve zoning.

*Discover the updated status of this myth here.

Myth #4 – Ductless mini-splits provide superior comfort and quality of life.

The problems with ductless cooling are not well understood by many U.S. consumers since they are relatively new to this region. The typical comfort experience with mini-split systems could provide a real challenge for American consumers who are used to central AC systems with good airflow exchange, filtration and humidity control. Cold and hot spots are also common with ductless systems due to the spacing of the indoor units. In addition, there are concerns about US homeowners’ reaction to the aesthetic and architectural impact of having air conditioning systems hanging on several interior walls and having refrigerant lines running to various rooms on the sides of their homes. Before installing a ductless system with multiple evaporating units it might be good to show your customer some photographs of some of your previous mini-split installations so they have proper expectations.

*Discover the updated status of this myth here.

The Bottom Line on Ductless Mini-Split Systems

Ductless mini-split systems are ideal for spot cooling situations in homes and businesses where ductwork is either not available or difficult to install. It is important for contractors to have these systems in their portfolio of HVAC solutions for certain situations and learning where and when to recommend them is essential. Knowing the facts associated with these new systems is also essential to avoiding problems when customers are surprised by the many “myths” about this technology.

The myths in this article have been reevaluated. You can find the updated article here.

What has your experience been with ductless mini-splits? Leave us a comment below!

A typical indoor wall-mounted, evaporating unit – usually one per room are required to minimize hot and cold spots.

A typical U.S. style home is shown here with a retrofit mini-split system. Notice the exterior line sets and condensate drains. Thermal losses could be expected from the vertical, external refrigerant lines and these might cause the system to have trouble keeping up on really hot days. Also, notice that the window-room air conditioners have not yet been removed. A close up photo of the house above, showing the external refrigerant lines and a condensate drain line. Ductless mini-split systems are often used to cool room additions as shown here in the garage area. A large, high rise apartment building is shown, using many mini-split systems – one or more per apartment.A large, urban apartment building is shown, using mini-split systems – one or more per apartment.

Share
print

Was this helpful?

Vote This Post Up 634Loading...

538 thoughts on “Four Myths About Ductless Mini-Splits

  1. Dear Sales,

    Could you kindly give us a quotation for the product below including tax and the lead time for the delivery of the product should not be more than 2-4 weeks from the date of receipt of our purchase order.

    (1). Mini-Split AC Systems 18,000 BTU 19 SEER 220~240V/1Ph/60Hz — Qty: 50 pcs
    (2). Mini-Split AC Systems 24,000 BTU 19 SEER 220~240V/1Ph/60Hz —— Qty: 50 pcs

    Our institutional payment terms are Net30 days from the date of your invoice with our official institutional purchase order. Since there is probably specific information that you require before establishing a credit account with us, perhaps it will make more sense for you to send us the paper works to be filled out.

    For any further information do not hesitate to contact me.

    I look forward to hearing from you.

    Ralph F. Philbrick
    Director of Purchasing
    Procurement, Contracts and Administrative Officer
    President and Fellows of Harvard College
    1033 Massachusetts Avenue, 2nd Floor
    Cambridge, MA 02138
    Phone: 413-351-7599

  2. The installed costs associated with using mini-splits to cool and heat an average 2,000 square foot home with ductless mini-splits would cost almost three times the cost of simply replacing your central AC system with another ducted system.

Leave a Reply to john Cancel reply

Your email address will not be published. Required fields are marked *